Creative resin dice making guide

一.The following materials are required to make resin dice:

1. Die die: you can buy various styles of die die online, such as resin die die 7 polyhedral die die DIY die making silicone die, BMOI mahjong die hipster DIY crystal drop glue pure color die material silicone light gray, there are different shapes, colors and specifications to choose from.
2. Resin glue: such as epoxy resin dice special ab drop glue high hardness resistance to yellowing glue multi-faceted high-definition grinding crystal drop glue, this glue has high hardness, yellowing resistance and other characteristics, suitable for the production of dice crafts.
3. Pigments: Acrylic pigments can be used to color the resin dice to give it a transparent or various color effect. Resin color can also be used imported color paste pigments, late is not easy to fade.
4. Decorative materials such as sequins: Decorative materials such as sequins and glitter can be added according to personal preferences to increase the beauty of the dice.
5. Mixing stick: Used to stir materials such as resin glue and pigments to make them evenly mixed.
6. Small cup: Used to hold resin glue and pigments and other materials, easy to operate.
7. Gloves: Wear gloves during the production process to protect your hands from materials such as resin glue.

二.Second, production steps

(1) Prepare the resin mixture
First, we need to prepare the resin mixture. The off-white, fog-grey and black resins were placed in separate containers. The off-white resin will be the main color, and we will pour in a small amount of fog gray and black resin mixture. Next, gently stir the three resins with a stirring stick, taking care to create only a swirl pattern and avoid losing the marbled effect of the three colors completely mixing into a single hue.
(2) Add the mixture to the mold
When the resin mixture for the marble effect is ready, it is ready to be poured into the die mold. If you use a small cup, you may need to make it in two batches. It should be noted that if rapid curing occurs, it may cause harm. Rapid curing means mixing a large amount of resin and leaving it for 10 to 15 minutes, at which point the resin temperature can reach 400 degrees Fahrenheit and release chemicals that are harmful to health, so it is important to be careful when handling the resin.
(3) Curing and stripping
After the resin mixture is poured into the mold, it is allowed to cure in the mold overnight, approximately 24 hours. When the time is up and the project is completely dry, the mold can be carefully removed. If you find bubbles on the surface of the die after stripping, you can use sandpaper to smooth it.